Signed saturating Absolute value. This instruction reads each vector element from the source SIMD&FP register, puts the absolute value of the result into a vector, and writes the vector to the destination SIMD&FP register. All the values in this instruction are signed integer values.
If overflow occurs with any of the results, those results are saturated. If saturation occurs, the cumulative saturation bit FPSR.QC is set.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
It has encodings from 2 classes: Scalar and Vector
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
0 | 1 | 0 | 1 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
U |
integer d = UInt(Rd); integer n = UInt(Rn); integer esize = 8 << UInt(size); integer datasize = esize; integer elements = 1; boolean neg = (U == '1');
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
0 | Q | 0 | 0 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
U |
integer d = UInt(Rd); integer n = UInt(Rn); if size:Q == '110' then UNDEFINED; integer esize = 8 << UInt(size); integer datasize = if Q == '1' then 128 else 64; integer elements = datasize DIV esize; boolean neg = (U == '1');
<V> |
Is a width specifier,
encoded in
size:
|
<d> |
Is the number of the SIMD&FP destination register, encoded in the "Rd" field. |
<n> |
Is the number of the SIMD&FP source register, encoded in the "Rn" field. |
<Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
<T> |
Is an arrangement specifier,
encoded in
size:Q:
|
<Vn> |
Is the name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); bits(datasize) operand = V[n]; bits(datasize) result; integer element; boolean sat; for e = 0 to elements-1 element = SInt(Elem[operand, e, esize]); if neg then element = -element; else element = Abs(element); (Elem[result, e, esize], sat) = SignedSatQ(element, esize); if sat then FPSR.QC = '1'; V[d] = result;
Internal version only: isa v32.13, AdvSIMD v29.04, pseudocode morello-2022-01_rc2, capabilities morello-2022-01_rc2 ; Build timestamp: 2022-01-11T11:23
Copyright © 2010-2022 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.