Floating-point Convert precision (scalar). This instruction converts the floating-point value in the SIMD&FP source register to the precision for the destination register data type using the rounding mode that is determined by the FPCR and writes the result to the SIMD&FP destination register.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | ftype | 1 | 0 | 0 | 0 | 1 | opc | 1 | 0 | 0 | 0 | 0 | Rn | Rd | ||||||||||
integer d = UInt(Rd); integer n = UInt(Rn); integer srcsize; integer dstsize; if ftype == opc then UNDEFINED; case ftype of when '00' srcsize = 32; when '01' srcsize = 64; when '10' UNDEFINED; when '11' srcsize = 16; case opc of when '00' dstsize = 32; when '01' dstsize = 64; when '10' UNDEFINED; when '11' dstsize = 16;
| <Dd> |
Is the 64-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Hd> |
Is the 16-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Sn> |
Is the 32-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
| <Sd> |
Is the 32-bit name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <Hn> |
Is the 16-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
| <Dn> |
Is the 64-bit name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); bits(dstsize) result; bits(srcsize) operand = V[n]; result = FPConvert(operand, FPCR); V[d] = result;
Internal version only: isa v32.13, AdvSIMD v29.04, pseudocode morello-2022-01_rc2, capabilities morello-2022-01_rc2 ; Build timestamp: 2022-01-11T11:23
Copyright © 2010-2022 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.