Signed saturating negate
This instruction reads each vector element from the source SIMD&FP register, negates each value, places the result into a vector, and writes the vector to the destination SIMD&FP register. All the values in this instruction are signed integer values.
If overflow occurs with any of the results, those results are saturated. If saturation occurs, the cumulative saturation bit FPSR.QC is set.
Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.
It has encodings from 2 classes: Scalar and Vector
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
| U | opcode | ||||||||||||||||||||||||||||||
if !IsFeatureImplemented(FEAT_AdvSIMD) then EndOfDecode(Decode_UNDEF); constant integer d = UInt(Rd); constant integer n = UInt(Rn); constant integer esize = 8 << UInt(size); constant integer datasize = esize; constant integer elements = 1;
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | Q | 1 | 0 | 1 | 1 | 1 | 0 | size | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | Rn | Rd | |||||||||
| U | opcode | ||||||||||||||||||||||||||||||
if !IsFeatureImplemented(FEAT_AdvSIMD) then EndOfDecode(Decode_UNDEF); if size:Q == '110' then EndOfDecode(Decode_UNDEF); constant integer d = UInt(Rd); constant integer n = UInt(Rn); constant integer esize = 8 << UInt(size); constant integer datasize = 64 << UInt(Q); constant integer elements = datasize DIV esize;
| <V> |
Is a width specifier,
encoded in
|
| <d> |
Is the number of the SIMD&FP destination register, encoded in the "Rd" field. |
| <n> |
Is the number of the SIMD&FP source register, encoded in the "Rn" field. |
| <Vd> |
Is the name of the SIMD&FP destination register, encoded in the "Rd" field. |
| <T> |
Is an arrangement specifier,
encoded in
|
| <Vn> |
Is the name of the SIMD&FP source register, encoded in the "Rn" field. |
CheckFPAdvSIMDEnabled64(); constant bits(datasize) operand = V[n, datasize]; bits(datasize) result; integer element; boolean sat; for e = 0 to elements-1 element = SInt(Elem[operand, e, esize]); element = -element; (Elem[result, e, esize], sat) = SignedSatQ(element, esize); if sat then FPSR.QC = '1'; V[d, datasize] = result;
Internal version only: aarchmrs v2024-12_rel, pseudocode v2024-12_rel ; Build timestamp: 2024-12-15T22:18
Copyright © 2010-2024 Arm Limited or its affiliates. All rights reserved. This document is Non-Confidential.